1. The relationship between the diameter of the transmission drum of the conveyor belt and the fabric layer of the conveyor belt, the matching of the transmission drum and the reversing drum, and the requirements for the groove angle of the idler should be reasonably selected according to the design regulations of the conveyor belt.

2. The feeding direction should follow the running direction of the conveyor belt. To reduce the impact of material falling on the conveyor belt, a chute should be used to minimize the distance of material drop; The receiving section of the conveyor belt should shorten the distance between the rollers and use buffer rollers to prevent material leakage. The conveyor belt should also use a soft and moderate material blocking plate to prevent the blocking plate from being too hard and scratching the surface of the conveyor belt.

3. Prevent the conveyor belt from starting under load.

4. If the conveyor belt deviates, timely measures should be taken to correct it.

5. Conveyor belts of different types and specifications should not be used together, and their joints should be glued together.

6. The type, structure, specifications, and number of layers of the conveyor belt should be selected reasonably according to the usage conditions.

7. The running speed of the conveyor belt should generally not exceed 2.5m/s. For materials with large block size and high wear, and for unloading devices using fixed pears, low speed should be used as much as possible.

8. When the conveyor is in use, if there is a lack of rollers, they should be added and repaired in a timely manner; The idler roller is covered with material, causing it to not rotate properly, preventing material leakage from getting stuck between the drum and the tape. Pay attention to the lubrication of the moving parts of the conveyor belt, but do not oil the conveyor belt.

9. To prevent the conveyor belt from being blocked by the frame, pillars, or block materials, and to prevent breakage and tearing, if local damage is found on the conveyor belt, artificial cotton should be used to repair it in a timely manner to avoid expansion.