During transportation and storage, the conveyor belt should be kept clean, avoiding direct sunlight or soaking in rain and snow, and preventing contact with substances such as acids, alkalis, oils, organic solvents, etc. The heating device should be located 1 meter away.

The warehouse temperature should be maintained between 18-40 ℃, and the relative humidity should be maintained between 50-80%.

During storage, the conveyor belt should be rolled and not folded. It should be flipped once every quarter during storage.

Conveyor belts of different types and specifications should not be connected together, and the joints should be glued together.

Reasonably select the type, structure, specifications, and number of layers of the conveyor belt according to the usage conditions.

The operating speed of the whole core flame-retardant conveyor belt should generally not exceed 2.5 meters per second, and materials with large block size and wear and tear, as well as fixed unloading devices, should be operated at a low speed as much as possible.

According to the design regulations of the conveyor, the relationship between the diameter of the transmission drum and the fabric layer of the conveyor belt, the supporting facilities of the transmission drum and the reversing drum, and the requirements for the groove angle of the idler roller should be reasonably selected.

The feeding direction should conform to the running direction of the conveyor belt. To reduce the impact of material falling on the conveyor belt, a chute should be used to minimize the distance of material falling; The feeding section of the conveyor belt should shorten the distance between the rollers, and the buffer rollers should prevent material leakage. The belt should use a soft and moderate baffle to prevent the baffle from being too hard and scratching the surface of the conveyor belt.