1. The feeding port should avoid being directly above the drum or roller;

2. To reduce the impact and wear of materials on the tape, the feeding direction should be in line with the running direction of the tape;

3. The drop of materials falling onto the tape should be minimized as much as possible;

4. The tape receiving section should shorten the distance between the rollers and adopt buffering measures. Rubber conveyor belts have characteristics such as heat resistance, wear resistance, burn resistance, oil resistance, alkali resistance, alkali resistance, heat resistance, and cold resistance. Mainly used for solid material transportation in various mining, metallurgy, steel, coal, hydropower, building materials, chemical, grain and other enterprises. To avoid scratching the tape, the contact area between the material blocking device, scraper cleaning device, and unloading device and the tape should be made of rubber plates with suitable hardness, and tape heads with cloth layers should not be used;

5. Check the roller drum every day, replace it in a timely manner if it cannot operate abnormally, and check if there are any attachments on the roller drum and clean it in a timely manner. Rubber conveyor belts have characteristics such as heat resistance, wear resistance, burn resistance, oil resistance, alkali resistance, alkali resistance, heat resistance, and cold resistance. Mainly used for solid material transportation in various mining, metallurgy, steel, coal, hydropower, building materials, chemical, grain and other enterprises.